高壓去毛刺清洗機在使用過程中可能會遇到多種故障，以下是一些常見故障及其解決方法：

　　The high-pressure deburring cleaning machine may encounter various faults during use. Here are some common faults and their solutions:

　　常見故障及解決方法

　　Common faults and solutions

　　出水壓力不足

　　Insufficient outlet pressure

　　供水管漏氣：檢查并加固或更換供水管。

　　Leakage of water supply pipe: Check and reinforce or replace the water supply pipe.

　　自來水供水不足：使用大型水容器供水。

　　Insufficient tap water supply: Use large water containers for water supply.

　　進水濾芯堵塞：更換進水濾芯或清理濾芯。

　　Water inlet filter clogged: Replace the water inlet filter or clean the filter.

　　進水管單向閥損壞或老化：更換單向閥。

　　The one-way valve of the inlet pipe is damaged or aged: replace the one-way valve.

　　調壓閥頂針損壞：更換調壓閥頂針。

　　Damaged top pin of pressure regulating valve: Replace the top pin of the pressure regulating valve.

　　噴嘴堵塞：疏通噴嘴或高壓管道。

　　Nozzle blockage: unclog the nozzle or high-pressure pipeline.

　　調壓閥內部承壓彈簧斷裂/老化：更換彈簧。

　　The pressure bearing spring inside the pressure regulating valve is broken/aged: replace the spring.

　　壓力不穩定

　　Unstable pressure

　　進水口堵塞：清洗進水口。

　　Inlet blockage: Clean the inlet.

　　泵體漏水：更換泵體密封圈。

　　Pump body leakage: Replace the pump body sealing ring.

　　壓力調節器故障：更換壓力調節器。

　　Pressure regulator malfunction: Replace the pressure regulator.

　　設備啟動問題

　　Equipment startup issue

　　電源故障：檢查電源連接。

　　Power failure: Check the power connection.

　　電機故障：檢查電機狀態。

　　Motor malfunction: Check the status of the motor.

　　開關故障：檢查開關是否正常。

　　Switch malfunction: Check if the switch is functioning properly.

　　線路故障：檢查線路連接。

　　Line fault: Check the line connection.

　　設備運行異常聲音

　　Abnormal sound during device operation

　　電機軸承缺油：在電機注油孔加黃油。

　　Motor bearing oil shortage: Add butter to the motor oil hole.

　　高壓水泵內部異響：檢查是否吸入了空氣或內部零件損壞。

　　Internal abnormal noise of high-pressure water pump: Check if air is sucked in or if internal parts are damaged.

　　設備漏水

　　Equipment leakage

　　密封圈老化或損壞：更換密封圈。

　　Aging or damage of sealing ring: Replace the sealing ring.

　　泵體磨損：更換泵體。

　　Wear of pump body: Replace the pump body.

　　進水口堵塞：清洗進水口。

　　Inlet blockage: Clean the inlet.

　　設備溫度過高

　　The device temperature is too high

　　環境溫度過高：確保工作環境通風良好。

　　High ambient temperature: Ensure good ventilation in the working environment.

　　油液問題：檢查油液質量和溫度。

　　Oil problem: Check the quality and temperature of the oil.

　　冷卻系統故障：維護或更換冷卻系統。

　　Cooling system malfunction: Maintain or replace the cooling system.

　　注意事項

　　matters needing attention

　　在進行任何維修工作前，請確保電源已斷開，避免觸電事故。

　　Before carrying out any repair work, please ensure that the power is disconnected to avoid electric shock accidents.

　　若自己無法確定故障原因或無法解決問題，請聯系專業維修人員進行處理。

　　If you are unable to determine the cause of the malfunction or solve the problem, please contact professional maintenance personnel for assistance.

　　定期對設備進行維護和保養，可以預防許多常見故障的發生。

　　Regular maintenance and upkeep of equipment can prevent many common malfunctions from occurring.

　　本文由高壓去毛刺清洗機提供幫助，更多的相關內容請點擊：http://cyzb88.com希望本文能夠為您帶來幫助，感謝您的閱讀！

　　This article is assisted by a high-pressure deburring cleaning machine. For more related content, please click: http://cyzb88.com I hope this article can be helpful to you. Thank you for reading!